INFLATABLES
MULTI PURPOSES INFLATABLES PVC COATED FABRIC
Nowadays the nedds of PVC Coated Material is thriving drastically. Being fully aware for such a need, Ateja through its international brand AGTex release a collection of multi purpose Inflatables PVC Coated Material which can be used for inflatable toys, inflatable pool, advertising inflatable arches and inflatable structure.
Designed to meet the specification of outdoor application, high water resistant characteristics and fire rated performance make it ideal outdoor material for all weather application.

Inflatables Toys

Inflatables Pool

Advertising Inflatables Arches

Inflatables Structure
TECHNICAL SPECIFICATION
The technical specification shown here are based on the best current available and average results from laboratory testing with at ±5% tolerance and provided as a source of information only and do not constitute any agreement concerning the good's warranty and refers to the goods supplied on original state without any processing done by the customer.
The specification suggested here does not guarantee the particular application of the customer and it requires the customer to conduct their won comprehensive test concerning suitability of the material for its intended application.
*** Available in 550ACB & 650ACM
Coating Material | : | PVC (Polyvinyl Chloride) |
Base Fabric | : | High Tenacity Polyester |
Total Weight | : | 550 gr/m2 |
Width | : | 200 cm, 250 cm, 300 cm, & as requested |
Thickness | : | 0.45 mm |
Tensile Strength | : | 260 daN/5cm |
Tear Strength | : | 25 daN |
Working Temperature | : | -30 ∼ +70 oC |
Flame Retardancy | : | Available upon request |
Adhesion | : | 9 daN/5cm |
Finishing | : | Glossy/Matte |
Quality Management System | : | ISO 9001:2008 |
Standard EN ISO 2286-2 | : | Total Weight & Thickness |
Standard EN ISO 1421 | : | Tensile Strength |
Standard EN ISO 2411 | : | Adhesion |
Standard DIN 53363 | : | Tear Strength |
Coating Material | : | PVC (Polyvinyl Chloride) |
Base Fabric | : | High Tenacity Polyester |
Total Weight | : | 650 gr/m2 |
Width | : | 200 cm, 250 cm, 300 cm, & as requested |
Thickness | : | 0.5 mm |
Tensile Strength | : | 280 daN/5cm |
Tear Strength | : | 30 daN |
Working Temperature | : | -30 ∼ +70 oC |
Flame Retardancy | : | Available upon request |
Adhesion | : | 9.5 daN/5cm |
Finishing | : | Glossy/Matte |
Quality Management System | : | ISO 9001:2008 |
Standard EN ISO 2286-2 | : | Total Weight & Thickness |
Standard EN ISO 1421 | : | Tensile Strength |
Standard EN ISO 2411 | : | Adhesion |
Standard DIN 53363 | : | Tear Strength |
DOWNLOAD CATALOGUE
COMPOSITE MEMBRANE
1. Base Fabrics
2. Primary Coating
3. Top Coating
4. Surface Treatment (Lacquering)
BASE FABRIC
A woven base fabric of high tenacity polyester yarns is the base material to provide tear strength, tensile strength and dimensional stability on finished product.
PRIMARY & TOP COATING
The primary PVC coating impregnate the base cloth to enhance the impressive dimensional stability, high tensile strength and high elongation rupture.
SURFACE TREATMENT (LACQUERING)
Applying the lacquer on the surface generates the maximum protection quality against atmospheric chemical, microbial and fungal attacks, weather and environment friendly resistance to Ultra Violet Thermal, Rain, Abrasion and Flame Retardant.
THE MAJOR ADVANTAGES
- Limitless architectural design possibility
- Low construction cost & efficiency
- Available for large size roofings & fitting
- Lightweight and flexible yet strong and durable
- Easy handling and fast installation
- Mobile, temporary and permanent basis use
- Weather and environmental friendly
MAIN BENEFITS
- Printable and Easily Absorb the Ink
- Excellent Tensile and Tear Strength
- Easy Maintenance
- Waterproof and Superb Protection Against Ultra Violet